硅胶皮贴铝合金板材胶水，粘硅胶料与金属胶水

  巨箭JUKAM > g-988 >硅酮胶产品描述>巨箭jukam g-988专业研发部门的有机硅粘合剂的硅胶和塑料，电木粘接，硅胶与硅胶、硅胶、硅胶与金属、玻璃、陶瓷、塑料、玻璃和金属，在脆性，发白等问题克服传统的胶粘剂，胶粘剂的透明、环保、无刺激性缺陷，无异味！

Jujube JUKAM> g-988> Silicone Rubber Product Description> Jaram jukam g-988 professional R & D department silicone adhesive silicone and plastic, bakelite, silicone and silica gel, silicone, silicone and metal, glass , Ceramics, plastic, glass and metal, in the brittle, white and other issues to overcome the traditional adhesive, adhesive transparent, environmentally friendly, non-irritating defects, no smell!

主要用于：硅胶、塑料、金属、玻璃、陶瓷及木材粘接。

Mainly used for: silicone, plastic, metal, glass, ceramic and wood bonding.

四、产品特性：胶体固化为软弹性状态，韧性优良，可弯曲、不白、强度高、温度低！具有防水、防潮、耐油、抗老化、抗震动、绝缘等特点！>

Fourth, the product features: colloid curing soft elastic state, excellent toughness, can be bent, not white, high strength, low temperature! With waterproof, moisture, oil, anti-aging, anti-vibration, insulation and other characteristics! >

五、操作说明书>对粘接材料表面，一般的清洁，涂后立即粘合，胶层在0.05-0.2mm层厚度、温室8-15分钟干燥的位置，24小时可完全固化；在粘合后在50°—150°之间的干燥4-12小时固化，可以达到更好的效果！在测试强度之前，请务必等待24小时！>

5, operating instructions> on the surface of the adhesive material, the general clean, coated immediately after the adhesive layer in the 0.05-0.2mm layer thickness, the greenhouse 8-15 minutes dry position, 24 hours can be completely cured; after bonding Drying between 50 ° -150 ° C for 4-12 hours can achieve better results! Be sure to wait 24 hours before testing strength! >

六、> 90ml / 330毫升/公司包装规格>

Six,> 90ml / 330ml / company packaging specifications

七，保质期：储存于阴凉干燥处，远离火源；有效期：6-8个月（温室）

Seven, shelf life: stored in a cool dry place, away from fire; Valid: 6-8 months (greenhouse)